Do you know how to use the industrial endoscope?

We will introduce some methods and processes of application about the industrial endoscope. So absorb it quickly and make it your own! 
  First of all, we should know that inside construction of the objects and find the specific locations. After linking the related instruments according to using processes, you should make sure the parts of the machine is loosen, the power supply connected is correct, the grounding is reliable. 
  Second, before choosing the suitable probe lens into the machine channels, you should figure out the channel’s situation if exist the burr or other obstacles, which could damage the probe lens. 
  Third, aiming at the complicate products, which inside construction could not be known, you can inspect through the camera lens before making sure the lens directly facing the inspection areas. 
  Besides, for the sake of your eyes, you should adjust to the testing environment and brightness in advance, so that you can avoid missing detection because of the visual fatigue. During the process of inspection, you should make sure the probe lens reaching the specify parts successfully. If the probe lens comes across obvious obstacles in the process of moving, you should stop heading instantly and begin to back off slowly. Instead, don’t drag it with effort our force when the coiler get chucked, avoiding the damage of the machine. One other thing to note is the moving speed can not be over 10mm/s. 
  Finally, cleaning the probe lens and instruments and tiding up the scene. 

http://www.industrialpipevideocamera.com/